• Natural stone manufacturing & export
  • Marble, granite, sandstone, limestone, quartzite & slate
  • Shipped to 35 countries across 6 continents
  • Monuments & memorials made to your drawing
  • Blocks, slabs, cut-to-size & finished units
  • Container loads on FOB & CIF terms
  • CAD drawings & sample approval before cutting
Request a quote
United States — Urns & cremation memorials

Cremation memorials,
with somewhere for the urn.

Granite urns, benches, pedestals, boulders and markers for cremation gardens — every one cut with the chamber, the seal and the lettering worked out before production, not after the family has chosen it.

Urn, bench, pedestal, boulder Sealed chambers Etched portraits Matched vase sets Dealer and cemetery supply

Where the
cremains actually sit.

This is the question families ask and the one enquiries usually leave out. Four answers, and each one changes how the piece is cut.

In the urn itself Holds1 urn SettingDisplayed or interred The urn is the memorial. Sealed base plate, and it can still be buried or placed in a niche later.
Sealed in the base Holds1–4 urns SettingUpright memorial A chamber cut into the base, closed with a sealed plate. Nothing on the face says it is there.
Under the bench Holds2–4 urns SettingSeating Chambers in the legs or the plinth. The family gets somewhere to sit, not just something to look at.
In a boulder cavity Holds1–2 urns SettingNatural setting Cored from behind or below, polished face carries the lettering.

The US standard adult urn runs about 200 cubic inches and a companion about 400. Send the urn or insert you supply and the chamber is cut around it, with the seal plate and fixings supplied to match.

Cut, sealed
and tested before it ships.

A chamber that does not close properly is the one failure a family notices. Every seal is fitted and checked at the works, and the fixings travel in the same box.

DrawingForm, capacity, letteringBlockCut with the chamber in mindCoringCavity bored and squaredShapingProfile and radiiPolishingFaces and rimEngravingNames, dates, emblemsSeal & testPlate fitted, closure checkedPackingBoxed with the fixings
  1. 01DrawingForm, capacity, lettering
  2. 02BlockCut with the chamber in mind
  3. 03CoringCavity bored and squared
  4. 04ShapingProfile and radii
  5. 05PolishingFaces and rim
  6. 06EngravingNames, dates, emblems
  7. 07Seal & testPlate fitted, closure checked
  8. 08PackingBoxed with the fixings
CapacityStandard adult about 200 cubic inches, companion about 400, keepsakes small. Chambers are cut to the urn you supply, with clearance for the insert.
ClosuresThreaded base plates, recessed plates with stainless screws, or sealed with adhesive on site — say which your funeral homes prefer.
EngravingNames, dates, emblems and etched portraits. Proofs returned at full size before anything is cut.
Matched setsMemorial, vases, lantern and marker held to one block run so a cremation garden keeps one shade.
Cemetery rulesHeight, footprint and marker limits vary by cemetery — send the rule sheet and the drawing comes back inside it.
PackingIndividually boxed, rims and arrises protected, fixings bagged and taped inside the same carton.

Send the urn
and the cemetery's rules.

Request a quotation
Scroll to Top