• Natural stone manufacturing & export
  • Marble, granite, sandstone, limestone, quartzite & slate
  • Shipped to 35 countries across 6 continents
  • Monuments & memorials made to your drawing
  • Blocks, slabs, cut-to-size & finished units
  • Container loads on FOB & CIF terms
  • CAD drawings & sample approval before cutting
[email protected]
Request a quote
United States — Bronze memorial products

Bronze reads best
on granite cut for it.

Flush markers, niche and crypt plates, wall plaques and cast letters. The granite is ours — cut, polished, rebated and drilled to the plate. The bronze is either cast to your artwork through our foundry partners, or you send the plate you already buy and we make the base fit it exactly.

Granite bases to your plate Bronze cast to artwork Rebated or surface mounted Sloped and flush bases Mowing-edge margins

Twelve bronze-and-granite
products.

Order the pair together, or just the granite. The last card is the one most dealers use — bases cut to the bronze they already stock.

Flush marker on baseSingle Bronze plate set into a granite base, laid level with the turf Companion markerTwo names Wider plate for a couple on one granite base Wall plaqueBuilding or garden Cast bronze plaque on a granite backing panel Niche front plateColumbarium Bronze front for a cremation niche in a granite bank Crypt front plateMausoleum Bronze shutter plate on a granite crypt front Bronze vaseWith the marker Fixed or turn-down vase set into the granite base Military emblemService insignia Cast emblems and service seals fixed to the plate or base Cast lettersIndividual letters Bronze letters pinned to a polished granite face Dedication plaqueCivic Bronze dedication panel on a granite plinth Relief portraitCast relief Portrait or scene cast in bronze on a granite ground Bench plaque setSeating Small bronze plates for granite benches and rails Granite bases onlyFor your bronze Bases cut and rebated to the plate you already buy

How the plate
meets the stone.

This detail decides how the marker survives twenty years of mowers, frost and cleaning. Four ways we cut it — tell us which your cemeteries specify.

Rebated flush DetailMilled rebate Plate drops into a milled recess and finishes level with the granite face. Cleanest line, nothing proud of the stone.
Surface mounted DetailCast studs Plate sits on the face, held on cast studs set into drilled holes. Simplest to fix and to replace later.
Sloped base Detail15°–45° Marker set on an angled granite base so water runs off and it reads standing up. Upright reading in a lawn setting.
Mowing-edge base Detail3–4 in margin A wide granite margin around the plate so mowers never touch the bronze. Cemetery-standard turf detail.

Common US marker sizes are 24 × 12, 28 × 16, 36 × 14 and 44 × 14 in, usually on a base with a 3–4 in granite margin. Send the plate drawing with the stud positions and the rebate comes out right the first time.

Plate and base
fitted to each other.

Where we supply both, the bronze is offered up to its own base before anything is packed. Where you supply the bronze, we cut to your drawing and check it against a template.

ArtworkNames, emblems, layoutProofFull-size, signed offBronzeCast and finishedGraniteBase cut and polishedRebateRecess and stud holes milledTrial fitPlate offered to the basePackingBronze boxed separately
  1. 01ArtworkNames, emblems, layout
  2. 02ProofFull-size, signed off
  3. 03BronzeCast and finished
  4. 04GraniteBase cut and polished
  5. 05RebateRecess and stud holes milled
  6. 06Trial fitPlate offered to the base
  7. 07PackingBronze boxed separately

The base is
the frame, not the picture.

Bronze carries the detail, so the granite is chosen for contrast and for how it weathers around the plate — not for figure.

Standard base Steel GreyNeutral ground that lets the bronze carry the piece Contrast Absolute BlackBronze reads warm and bright against it Light settings Kashmir WhitePale base for bronze in gardens and plazas Warm Tan BrownRed-brown sits close to the bronze tone Accent Imperial RedWhere a coloured base is wanted under bronze Premium Black GalaxySpeckle catches light around the plate
Two ways to orderGranite and bronze together, or granite bases against your own bronze supplier's drawing — many dealers keep their foundry and change only the stone.
Rebates & studsRecess depth cut to the plate thickness, stud holes drilled and cleaned, with drainage where the detail needs it.
FinishBases polished, honed or with a sawn margin — a honed margin hides mower marks far better than polish.
Sloped basesCut to the angle your cemetery allows, with the bronze seated so water leaves the plate rather than pooling on it.
Emblems & vasesProvision cut for service emblems, turn-down vases and photo medallions supplied by you or through us.
PackingBronze boxed separately from the stone, fixings bagged to the base they belong to.

Send the plate drawing.
The base will fit it.

Request a quotation
Scroll to Top